Interior Wall Insulation Paint

Interior Wall Insulation Paint

It is a new generation nano-technology liquid thermal insulation coating paint with a water-based elastic structure consisting of a homogeneous mixture of micron-sized expanded spheres and binder.

Interior insulation paint can be applied under ceilings, walls, tiles and laminate flooring. Expanded products with smaller microns than the exterior material are used for interior insulation. Barkkaft interior insulation paint can be colored if desired. With its structure that never harms human health, it allows you to apply it to every interior surface. Barkkaft -1- Provides high adhesion level and flexibility to every surface. Thanks to the spheres it contains, low heat can be applied economically in a short time.

It provides at least 10 times more insulation performance than all conventional insulation materials. It is applied much more easily and economically in a short time compared to other materials.

  • Since it is a perfect reflector, it is very effective in preventing energy permeability and provides energy savings of up to 50%.
  • Ease of application, since it is based on application, it can be applied more easily with a roller, brush or spray, saving time and money.
  • It can be applied to interior and exterior surfaces.
  • Do not breathe; It becomes sensitive to humidity and temperature changes by preventing hot and cold transitions, thus allowing the structure to breathe by not allowing sweating, moisture, mold and fungus formation.
  • It has sound insulation feature and prevents sound and vibration
  • It has a flame retardant feature.
  • It is elastic and resistant to impacts.
  • Its color is white. It can be colored with pigment. Paint can be applied on it.
  • It is not affected by wind and salt.
  • Since it adheres to the plaster in buildings, it provides performance as long as the plaster life (40-50 years).
  • It can be applied to any surface such as plastic, metal, concrete, brick, wood, etc.
  • It is very light. It does not impose earthquake load on the structure on which it is applied.
  • It is environmentally friendly. It does not contain substances harmful to human health.
  • It provides high efficiency in terms of energy efficiency.
  • Interior Facades and Ceilings of Buildings
  • On Balconies and Porches
  • Container buildings (office, house and other)
  • In Steel Building Structures
  • In Hangars and Garages
  • In Building Parking Lots
  • In Historical Buildings
  • In Prefabricated Buildings
  • In Frigofirk Vehicles
  • In trains, wagons, ships and planes
  • In military vehicles
  • In Cold Storage
  • It can be applied on all surfaces.

Nominal Thermal Conductivity Coefficient: 0.018 W/mK
Lifespan: At least 40-50 Years
Water Permeability: TS EN 1062-3 0,017kg / m2.h
Wear Resistance: TS EN ISO 5470-1 843mg
Color: White (can be colored with pigment)
Impact Resistance: No cracking, no breaking
Liquid Density: 0.7 kGn/dm3
Impact Resistance: TS EN ISO 6272-1 Class: III
One Layer Liquid Coating (0.5 mm) weight: 0.3 kg/m2
Adhesive Bond: TE EN 1542 B-1.0 N/mm2
Light Reflection: 90%
Light Diffusion (IR light): 95%

COLOR: White. It can be colored with pigment. Water-based paint can be applied on it.
CONSUMPTION: If applied with a maximum thickness of 2 mm: Consumption amount is 25-28m²/bucket. Application conditions have been evaluated excluding ground, weather conditions and different uses.
PACKAGING: In 18 L plastic buckets.
SHELF LIFE: If stored in unopened and undamaged packages, it has a shelf life of 24 months from the date of production.
STORAGE CONDITIONS: Store in a dry and cool environment in weather conditions above 0ºC.


  • If there is a mistake or break in the plaster, repair it and wait for the drying time.
  • After the bucket lid is opened, it should be mixed with a drill at medium speed.
  • Water should never be added to the insulation.
  • 4-5 hours after primer application (drying varies depending on weather conditions)
  • The first layer of Barkkaft insulation coating is applied. After at least 6 hours or complete drying, the 2nd and, if desired, the 3rd coat can be applied.
  • The application is applied with a brush or roller, it can also be sprayed with an airless machine.